Products applicable to Taiwan NCC certification:
1. Low-power radio frequency motors with operating frequencies from 9kHz to 300GHz, such as: wireless network (WLAN) products (including IEEE 802.11a/b/g), UNII, Bluetooth products, RFID, ZigBee, wireless keyboards, wireless mice, Wireless headset microphone, radio walkie-talkie, radio remote control toys, various radio remote controls, various wireless anti-theft devices, etc.
2. Public switched telephone network equipment (PSTN) products, such as wired telephones (including VOIP Internet telephones), automatic alarm equipment, telephone answering machines, fax machines, remote control devices, wired telephone wireless main and auxiliary machines, and key telephone systems , Data equipment (including ADSL equipment), incoming call display terminal equipment, 2.4GHz radio frequency telecommunication terminal equipment, etc.
3. Land mobile communication network equipment (PLMN) products, such as wireless broadband access mobile station equipment (WiMAX mobile terminal equipment), GSM 900/DCS 1800 mobile phone and terminal equipment (2G mobile phone), third-generation mobile communication terminal Equipment (3G mobile phone), etc.
(The following information is for customers to check the NCC certification. For more information, please contact our engineers directly at Email:peifeng.chen@szhtw.com.cn)
What is NCC certification?
NCC is the abbreviation of The National Communications Commission (The National Communications Commission), which mainly controls the communication and information equipment circulating and used in the Taiwan market:
1. LPE: Low Power Equipment is low power equipment (for example: Bluetooth, WIFI equipment);
2. TTE: Telecommunications Terminal Equipment is communication terminal equipment (for example: mobile phones, tablet devices).
NCC certification stipulates that all telecommunications terminal equipment, low-power radio frequency motors and telecommunications controlled radio frequency equipment must be formally approved before they can be sold on the market.
Basic information of NCC certification
Certification type
Mandatory
Technical
Information
N/A
Factory
inspection
N/A
EMC
test
YES
Validation
of Certificate
N/A
NCC certification document requirements:
1. Application
2. Antenna specifications
3. Chinese/English User Manual (Traditional Chinese)
4. Chinese/English product specifications (Traditional Chinese)
5. Circuit diagram or block diagram (RF oscillator must be specified)
6. List of interference sources and suppression components
7. The test report (EMI/RF/Safety/SAR) contains test photos and internal and external photos of the product
8. Product appearance photos
9. For-profit business registration certificate
10. Telecommunications Control Radio Frequency Equipment Business Permit License
11. Authorization letter
12. Other designated documents
NCC certification application process
1. The client provides product information to the institution (Huatongwei) for evaluation and quotation
2. The entrusting party confirms the quotation back, fills in the application form, provides samples and information, arranges the payment (first paragraph), and the agency opens the case
3. Arrange product forecasts and review data
4. If there is a problem with the test and data, arrange for rectification and retest until it is qualified
5. After the test and data are qualified, the issuing agency will conduct a witness test
6. After the witness test is completed, the issuing agency will issue a test report and issue a certificate
7. The entrusting party pays the payment (final payment), gets the certificate report, and closes the case
Application materials for Taiwan NCC certification
1. Product circuit schematic
2. Product block diagram
3. Product specifications
4. Product Manual
5. BOM
6. Service Application Form
7. Factory ISO9001 certificate
8. Antenna Specification
NCC certification testing regulations:
Low power radio frequency motor (RF)
Test regulations: LP0002
Telecom terminal equipment (Telecom)
Test regulations: PSTN01, PLMN01, PLMN08
Four, NCC certification model:
1. Local test in Taiwan
2. Need to pass NCC accredited laboratory test (Huatongwei).
3. Local agent
4. Accept applications from foreign manufacturers, others need to be companies registered in Taiwan
Taiwan NCC certification model:
1. Part-by-part inspection (products that are less produced can only be certified by NCC)
2. Type approval
3. Simple Declaration of Conformity
4. The certificate is valid for a long time
5. 3-4 weeks test and certification
NCC certification document requirements:
Document type approval (low power radio frequency)
1. Manual: Product name, brand, model and NCC warnings are required.
2. Product specification: product name, brand and model are required
3. Block diagram/line diagram: Optional
4. Antenna specifications: Antenna brand and model are required
5. Product appearance, interior and surrounding photos (photos must be marked with label and antenna location)
6. Type approval application and company registration certificate
7. Radio frequency license (not necessary)
8. Related conclusions
Declaration of conformity:
1. Manual: Product name, brand, model and NCC warnings are required.
2. Product specification: product name, brand and model are required
3. Test report (FCC or IC test report can be attached, but the end book is required)
4. Product appearance, interior and surrounding photos (photos must be marked with label and antenna location)
5. Brief application for declaration of conformity, company registration certificate
6. Related conclusions...
Wechat Public Number
Wechat Public Number
